Key Features
- Excellent transient response thanks to solid-state design
- Responds amazingly to EQ due to balanced frequency response
- Capture every last nuance of any performance
- Optimise your recording experience with the improved shockmount included
sE Electronics sE-T2 Microphone Overview
With solid state performance and versatile polar patterns what more could you want from a microphone? Meet the sE Electronics sE-T2. This large diaphragm condenser will revolutionise your approach to engineering and production. With a wide frequency range of 20Hz to 20kHz, the sE-T2 will capture every last nuance of any performance. Listening back will make you feel like you're sitting in the room with the artist.
The sE-T2's high frequency response is incredibly natural. Rest assured knowing your performances will not sound over hyped, or excessively bright. Thanks to this, the microphone is the ideal choice for recording kick drums, pianos, pop vocalists, as well as amplifiers. You'll find that due to its balanced low and mid frequencies the sE-T2 responds well to any form of EQ. What are you wanting for? Make better recordings today!
Product Ref: 17830
Full Description
View Full DescriptionLoud and clear
One of the perks of using a solid-state microphone is its lightning-fast response to transients. You'll be able to capture loud, percussive sounds without the fear of saturation or loss of detail. This is down to the sE-T2's titanium capsule. Stronger than any gold spluttered capsule, the T2 stands its ground against instruments with high SPLs. Shove that microphone right in front of any source knowing its performance will be nothing short of excellent.
Mind-blowing shockmount
The sE-T2's shockmount is an incredible asset to have. Unlike most, this is not obtrusive. It is designed to enhance your recording experience rather than hinder. The shockmount minimises the risk of low-end rumble ruining your recordings and allows you to get up close to any source. You'll be able to place the microphone right up to the grill of any amplifier speaker and inside the hole of any kick drum. Without compromise.
Features
- Titanium capsule captures the punch and impact of percussive sources
- Controls to dial the mic into your application
- 4 polar patterns: cardioid, supercardioid, omni, and figure-8
- 2 pre-attenuation pads
- 2 highpass filters
- Frequency Response: 20Hz-20KHz
- Requires +48V phantom power
- Includes shockmount and flight case
Specifications
- Frequency Response: 20Hz-20KHz
- Sensitivity: 28mv/pa-31 ± 1dB
- Polar Pattern: Omni, Cardioid, supercardioid, Figure 8
- Impedance: ≤ 50 Ohms
- Equivalent Noise Level: 14dB(A weighted)
- Max SPL for 0.5 THD@1000Hz for 0.5 : 140dB minimum
- Power Requirement: Phantom power 48V±4V
- Connector: 3-pin
- Product Code: SE-T2
| Reviews of our service
View all
