Full Description
View Full Description
So how do I get set up?
It's simple. Plug the mic output (found on the back of the receiver) into a channel on your mixing desk. Just like a normal wired mic.
Press the group button on the receiver to perform a Quickscan. This searches your environment to locate the clearest frequency for your performance.
Plug your PGA31 headset into the TGQ connection on the transmitter. Use the group and channel buttons to ‘pair’ the transmitter to the receiver. The 'ready' LED on the receiver will light up. Finally, turn up the transmitter gain dial to suit your voice. And it's as easy as that! You can now perform with wireless freedom.
PGA31 Headset Microphone
Tailored for vocals. The PGA31 is a precise microphone that preserves the details of your voice. The permanently charged capsule doesn’t require phantom power (it’s powered when connected to a Shure body pack). So now you can have the clarity of a condenser mic, without restriction. And the included windscreens tame unwanted plosives and breath noise- for maximum intelligibility.
Move freely, without picking up the sound around you. The headset's tight cardioid polar pattern focuses only on your voice. As well as sounding clean and clear, it will greatly reduce unwanted feedback from nearby stage monitors.
More than great sound. Great feel. Thanks to a slender wire form design, the PGA31 is comfortable and unobtrusive. It’s calibrated to stay totally secure, even during high energy performances. It can be worn in any situation. And the flexible gooseneck design allows for quick and precise adjustments.
There’s even a clothing clip, so you can tuck the headset cable out the way.
Comprehensive monitoring
With a Shure BLX System, you get wireless freedom with total peace of mind. The receiver’s ‘ready’ LED, telling you when your system is set up and secure. You don’t need to worry about signal dropouts.
If the channel starts clipping, an LED switches from green to red, letting you know when to adjust the transmitter's gain. There is even an LED monitor to tell you when the batteries are running low on the transmitter. Everything about the BLX Wireless System is clear and simple, for effortless setup straight out the box.
Legendary Shure durability
Boasting the tour-tough construction Shure are revered for.
The BLX14UK/PG31-K3E has been rigorously tested to make sure it can handle any environment. All Shure wireless systems are subject to heat, cold, humidity and the ‘Shure drop test’. They are built to survive the demands of life on the road. They’re ready for every performance.
Included in the Box
- 1 x PGA31 Headset Condenser Microphone
- 1 x BLX1 Body Pack Transmitter
- 1 x Shure BLX4 Analogue Single Channel Receiver
- 1 x PGA31 Clothing Clip
- 2 x PGA31 Windshields
- 1 x Power Supply
- 2 x AA battery
Features
PGA31 Headset Condenser Microphone
- Comfortable wire frame design
- Flexible gooseneck for easy positioning
- Secure fit even during energetic performances
- Cardioid polar pattern focuses only on your voice
- Clear, detailed sound similar to quality handheld mics
- Windscreens tame plosives for improved intelligibility
- Reliable in extremely hot and humid environments
- Permanently-charged condenser capsule (phantom power not required)
- TA4F (TQG) connector compatible with any Shure bodypack
BLX1 Body Pack Transmitter
- 14-hour run time and a 100 meter range from one pair of AA batteries
- Quick and easy frequency matching
- Continuously adjustable gain dial
- Easily accessible on/off switch
- Power & battery status LED
- Clip-on design easily attaches to performer
- Lightweight, comfortable and discrete build
- Rugged and robust - built for rigorous live performances
- TA4F (TQG) connection for use with Shure headset, lavalier, instrument mics and guitar cables
BLX4 Single Channel Receiver
- User friendly and intuitive design – no complicated setup options
- One touch QuickScan finds the best open frequency for uninterrupted signal
- Internal microprocessor-controlled antenna keeps the unit discrete and compact
- Two colour LED for monitoring signal level
- Compatible with up to 12 other systems
- XLR & 1/4" audio outputs
Specifications
PGA31 Headset Condenser Microphone
- Connector Type: TA4F (TGQ)
- Transducer Type: Condenser
- Polar Pattern: Cardioid
- Frequency Response: Tailored, 60Hz - 20kHz
- Phantom Power: Not required
- Sensitivity: -50 dBV/Pa - 3.20 mV/Pa
- Equivalent Selfnoise: 28 dB(A)
- Sound Pressure Levels: 145 dB
- Cable length: 1.3 m
- Weight: 60 g
BLX1 Body Pack Transmitter
- Connector Type: TA4F (TGQ)
- Operating Range (Up To): 100 m
- Batteries: AA (included)
- Battery Life: 14 hour
- Battery Status: Multi-Colour LED
- Transmitter Housings: Molded ABS
- Gain Adjustment Range: 26 dB
- Included Antenna: 1/4 Wave
- Input Impedance: 1 MΩ
- Weight: 75 g
- Dimensions (H x W x D): 110 mm x 64 mm x 21 mm
BLX4 Single Channel Receiver
- Transmission: Analog
- Power Supply: External
- Receiver Type: Single
- Number Of Compatible Systems Per Frequency Band: 12
- Receiver Displays: LEDs
- Housings: Molded ABS
- Scan Features: Quick Scan
- Rack Hardware: Optional URT2
- Image Rejection: 50 dB, Typical
- RF Sensitivity: -105 dBm, For 12dB SINAD, Typical
- Weight: 241 g
- Dimensions (H x W x D): 40 x 188 x 103 mm