Key Features
- 823.2 - 831.8 MHz & 863.2 - 864.8 MHz Wireless Operating Frequency
- 3.5 mm jack connector for lavaliers and headsets
- Up to 12 hours of continuous operation
- Easy to operate with smart features such as AutoScan
OFFLINE Sennheiser EW-DX SK Wireless Bodypack Transmitter, U1/5 Band Overview
The Sennheiser EW-DX SK is a wireless bodypack that has a 3.5 mm jack connector and is compatible with Evolution Wireless Digital systems. It can be used for up to 12 hours, has a persistent E-Ink display, charging contacts, rugged metal housing made to go the distance. Plus, it is compatible with a most Sennheiser lavalier and headset microphones.
The EW-DX system itself is a digital UHF system that can be scaled with ease. It has AutoScan, which allows for quick and easy setup, and deploys frequencies with equidistant channel spacing. As well as this, Sennheiser have provided a range of tools, including Control Cockpit, Wireless System Manager and Smart Assist App so you can monitor and control your system remotely.
Product Ref: 247789
Full Description
View Full DescriptionSimplify your wireless workflow
The EW-DX SK makes it easy to transmit signals wirelessly. The built-in function buttons make it easy to control straight from the bodypack - including a button lock function so settings aren't accidentally changed while in use. As well as this, the persistent E-Ink display means you can always see what settings you have been using - even when changing batteries; useful for keeping track of different wireless bodypacks.
Thanks to Autoscan you can set up your wireless system too. At the push of you can get multiple transmitters set up at equidistant frequency intervals; great if you want a super-scalable system to work with. And as well as this there are a wide range of Sennheiser apps you can use to manage and control your wireless setup - great if you are looking to configure a large system.
Features
- Sennheiser Performance Audio Codec (SePAC) means you never need to set gain, and you get a 134 dB range
- Up to a 100 m range you get 10mW fixed RF power
- E-Ink display persistently shows information and parameters – even when switching batteries
- Charging contact allow for in-device charging with separately available CHG 70N charger
- Control all transmitter settings from the bodypack with built-in function buttons
- Mute button programmable to be RF mute, AF mute or disabled
- Both digital audio and mic input trim control available
- Test tone generator available for testing and troubleshooting
- LED configurable to be on or off
- Low cut switchable to be off, 30, 60, 80, 100 or 120 Hz
- Instrument input has cable emulation to simulate the characteristics of cables
- Works with a range of Sennheiser lavaliers and headsets with 3.5 mm jack plug connections
- Rugged metal housing designed for use on stage
- Use in any RF environment (subject to local regulations)
Specifications
System
- Bluetooth® Low Energy (BLE) frequency range: 2402 – 2480 MHz
- Audio frequency response: 20 Hz – 20 kHz (-3 dB) @ 3 dBfs
- Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level
- Dynamic range: 134 dB
- System latency: 1.9 ms
- Operating temperature range: -10 °C – +50 °C
- Relative humidity: 5 – 95% (non-condensing)
EW-DX SK Bodypack Transmitter
- Input voltage: 2.0 – 4.35 V
- Input current: < 300 mA
- Power supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack
- Occupied bandwidth: 200 kHz
- Transmission power:
- Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP)
- LD mode: 10 mW ERP
- BLE: max. 10 mW EIRP
- Dimensions: 63.5 x 85 x 20 mm (without antennas)
- Weight (without batteries): approx. 115 – 120 g
| Reviews of our service
View all
