Moog MF-108M Moogerfooger Cluster Flux Effect Pedal

Full Description

The MF-108M can create an array of unique sounds with 6 different wave shapes:

• Sine
• Triangle
• Square
• Ramp
• Reverse Ramp
• Sample and Hold

You can tap in the tempo of you LFO via the Tap Tempo button or sync the Cluster Flux to a MIDI clock.

If you want to drive the Cluster Flux into tuned self-oscillation, use positive and negative feedback for a wider range of tones and voicing than is possible on a normal stomp box.

The MF-108M's Amount and Rate controls can be used for expression and modulation of the delay line - anything from vibrato to a jackhammer. If you only want a slight effect use the mix controls to dial in the perfect blend.

CV jacks on the back of the Moog Cluster Flux allow for control of Time, Rate, Mix, Feedback and Amount via the Moog EP-2 Expression Pedal, CV or other Moogerfoogers.

Like all Moogerfoogers, the Cluster FLux is made to work with all sound sources including guitars, drum machines and keyboards and is built like a tank for a lifetime of use!

Features/Specifications

Front Panel

• Time: Adjust delay time 0.6mS to 10mS in Flange mode and 5mS to 50mS in Chorus mode.
• Range: Select between Flanger and Chorus mode.
• Feedback: Continuous control from no feedback to infinite feedback. Bi-Polar control allows the feedback to highlight even or odd harmonics.
• Drive:Allows between -7dB and +28dB of gain or attenuation of the input signal for optimum signal path, level matching and distortion sounds.
• Output: Allows gain and attenuation of output signal for compatibility with a widerange of input devices.
• Mix: Cross fader control to vary the amount of wet or dry signal heard on output.
• LFO: Six position rotary switch to select the LFO wave shape for delay time modulation. Select between Sine, Triangle, Square, Ramp, Saw and Random stepped modulation.
• LFO Rate: Adjust the LFO rate from the sub audio to audio rates. Control from 0.05 Hz to 50 Hz from the front panel (more from the CV).
• LFO Amount: Controls the amount of LFO modulation of the delay time.

LEDs and switches

• Rate: A Bi-Color LED to display the rate and shape of the LFO wave as well as the source of control.
• MIDI: A Bi-Color LED to display the presence of MIDI control.
• Level: A Bi-Color LED to display the level of the input signal post drive control for optimum processing level.
• Bypass: A Bi-Color LED to indicate if the effect is engaged or not.
• Tap Tempo: A rugged smooth-acting stomp switch for setting LFO rate.
• Bypass Switch: A rugged smooth-acting stomp switch bypassing the unit with a buffered input.

Back Panel Features

• Audio In: 1/4" phone jack - accepts any instrument-level to line-level audio signals.
• Left/Mono Audio Out:1/4" phone jack 1/4" phone jack with adjustable output level for instrument or line level output.
• Right/Stereo Out: A Second output dip switch configurable for either Stereo out (two types), Delay only out, or dual mono out. Feedback, Time, LFO Rate, Mix, LFO Amount: all of which are stereo 1/4" jacks that accept Moogerfooger EP-2 (or equivalent) expression pedals, or 0-5V control voltages from either two-circuit or three-circuit 1/4" jacks.
• Feedback Insert: A 1/4" TRS Insert jack for inserting effects in the feedback loop of the delay chain. Line level output.
• MIDI In: A 5 Pin DIN input for controlling the MF-108 via MIDI Control.
• +9V Power Input Jack: accepts standard 9 volt center positive barrel power adaptor (power adaptor included). 300mA minimum required.

General Specifications

• Case: Rugged steel case with black powder coat panel, white silk screen and hardwood sides for a classic analog appearance.
• Dimensions: 9" x 6" x 2-1/2"
• Net Weight: 4 lbs
• Shipping Weight: 6 lbs, including power adaptor and instruction manual.
• Power Requirements: 105-125 volt, 3W. 220 volt power adaptor available on special order.